![background image](http://html1.mh-extra.com/html/barco/sim-7qp-hb/sim-7qp-hb_user-manual_4252429069.webp)
7. Advanced
Image 7-27
•
Color space
: allows to select between 5 different color spaces
-
RGB
-
ITU_BT_709
-
SMPTE_240M
-
ITU_BT_601
-
EBU
•
Clamp position
: allows to set the clamp pulse position in the clamping circuit
•
Clamp width
: allows to set the width of clamp pulse in the clamping circuit
It is recommended to use the default values.
Advanced settings for Digital Data sources (DVI)
The
advanced
button enables the advanced settings for digital data sources.
Image 7-28
UsePictureBox
can be disabled (
0
) or enabled (
1
). By default, it is disabled which means that only few timings can be changed. In
case of a DVI source this is not a problem.
In very speci
fi
c situations however (e.g. iBlend), more changes to the timings may be needed, such as the setting of the
Start pixels,
Active pixels, Start lines, Active lines
. In that case, hit
Enter
and change the slider to position
1
, thus enabling more settings in the
Edit
fi
le
menu.
Image 7-29
7.4.4
Save as (create a custom
fi
le)
Creating a custom
fi
le
When the loaded
fi
le is a standard
fi
le there is a possibility of saving it as a custom
fi
le (= creating a custom
fi
le) , this is done with
the save as function. The saved
fi
le will always be a custom
fi
le (saved in the custom directory)
For sources that are often used, a custom
fi
le should be created. This custom
fi
le will then be loaded auto-
matically and will prevent the Auto Image from being launched.
How to save a
fi
le ?
1. Press
MENU
to activate the Tool bar
2. Press
→
to select the
Image
fi
les
item
3. Press
↓
to Pull down the
Image
fi
les
menu
4. Use
↑
or
↓
to select
Save as...
R59770330 SIM 7QP SERIES 08/12/2014
65
Summary of Contents for SIM 7QP HB
