Barco SIM 7QP HB, User Manual

Page: 19 / 206

4. Installation
Image 4-4
SIM 7QP series:
fi xation points
Fixation points of the projector without frame
If the standard projector frame is not used, three bolts can be screwed into the threaded holes at the bottom of the projector to fi x it
to a custom frame. The bolts must meet the following speci fi cations:
• bolt type: M8x1.25
• strength class: 8.8 or higher
• preferred bolt length (bolt head not included): 25 mm < bolt length < 30 mm
• mounting torque range: 20 Nm (177 lbf.in) < torque < 23 Nm (205 lbf.in)
Image 4-5
SIM 7QP series:
fi xation points
4.3 Projector tilt
C
AUTION
:
Not respecting the projector tilt range will cause lamp fl icker or even lamp explosion.
Tilt range
The tilt range of the projector is restricted by the tilt range of the lamp. The drawings below show the maximal tilt range in both
senses.
R59770330 SIM 7QP SERIES 08/12/2014 15