Barco SIM 7QP HB, User Manual

Page: 10 / 206

1. Introduction
Image 1-2
RACU hand held control unit
Symbol overview
The following icons are used in the manual :
Caution
Warning
Info, term de fi nition. General info about the term.
Note, gives extra information about the described subject.
Tip, gives extra advice about the described subject.
Font overview
• Buttons are indicated in bold, e.g. OK .
• Menu items are indicated in italic .
• Step related notes, tips, warnings or cautions are printed in italic .
• Procedure related notes, tips, warnings or cautions are printed in bold between 2 lines preceded by the corresponding icon.
Portrait mode
This projector is designed to display images in portrait mode rather than landscape mode, which is more common. It has been
derived from a similar projector which displays images in landscape mode. This is why the on screen menu (OSD or On Screen
Display) is rotated over +90°.
In this User guide all of the images such as menu bars, dialog boxes, internal patterns, OSD patterns, etc. are shown in landscape
mode. When the projector is in front table con
fi guration, they will be seen in portrait mode on the screen, i.e. rotated over 90°
compared to what can be seen in the manual.
Example: The images below shows the GUI for the geometry alignment and the GUI for the lens shift menu as it will be visible on
the projected image if the projector is in front table con
fi guration.
6 R59770330 SIM 7QP SERIES 08/12/2014