![background image](http://html1.mh-extra.com/html/barco/sim-5w/sim-5w_user-manual_4251408031.webp)
4. Installation
•
3 for the color signals R,G,B
•
2 for the sync signals H (horizontal sync), V (vertical sync)
RGBS
: If the source disposes of a composite sync output i.e. one wire includes the horizontal
and
the vertical sync then the V BNC
must not be connected, resulting in 4 BNC being connected (V is free).
RG
s
B
: If the source disposes of a sync on Green output (i.e. the Green color signal includes the horizontal
and
the vertical sync),
then the H and V BNC’s must not be connected, resulting in 3 BNC being connected (H and V are free).
BNC Connector
R
G
B
H
V
RGBHV
R
G
B
H
V
RG
s
B
R
G
s
B
-
-
RGBS
R
G
B
S
-
Table 4-6
How to use the BNC’s in case of different RGB signals
The RGB 5 BNC input can also be used to connect a component video source : see
Connecting a Component
video source.
How to connect an RGB signal ?
1. Connect the 5 or 4 BNC cables to the projector’s RGB input
Projector
DVI-D
COMPUTER
DVI-D
HDCP
COMPUTER
Image 4-15
RGB connections
4.9.6
Component video
Component video connection
A component video signal is available can also be mentioned in the following way:
•
YUV
•
Pr Y Pb
•
(R-Y) Y (B-Y)
How to connect a component video signal?
1. Connect the 3 BNC cables to the projectors Pr Y Pb input.
R59770324 SIM 5W 22/12/2011
27
Summary of Contents for SIM 5W
Page 1: ...SIM 5W User guide R59770324 06 22 12 2011 Downloaded From projector manual com Barco Manuals ...
Page 54: ...5 Setup 50 R59770324 SIM 5W 22 12 2011 Downloaded From projector manual com Barco Manuals ...
Page 194: ...Index 190 R59770324 SIM 5W 22 12 2011 Downloaded From projector manual com Barco Manuals ...