![background image](http://html1.mh-extra.com/html/barco/sim-5w/sim-5w_user-manual_4251408187.webp)
7. Advanced
7.11.6.1 AutoImage
What can be done ?
AutoImage can be disabled. In case of a new (unknow) source, no automatic
fi
le selection will be done. Instead, a more or less
suited
fi
le will be selected, resulting in a misaligned image. Image settings must be done manually (edit image
fi
le).
How to enable/disable AutoImage ?
1. Press
MENU
to activate the Tool bar
2. Press
→
to select the
Service
item
3. Press
↓
to Pull down the menu
4. Use
↑
or
↓
to select
Operation options
5. Press
→
to pull down the menu
6. Press
↓
to select Autoimage
7. Press
→
to pull down the menu
8. Use
↑
or
↓
to select
On/Off
9. Press
ENTER
Image 7-245
A white bullet shows the active setting
7.11.6.2 Warning messages
What can be done?
It is possible to block some Warning messages during projector runtime. The table below gives an overview of those messages that
can be suppressed during runtime.
Warning message
Sim 5W
Galaxy NH-12
Galaxy NW-12
Galaxy NW-7
Description
NO SIGNAL
x
x
In case no incoming Sync is detected
Lamp error icon
x
In case of an actual lamp or LPS problem
Lamp runtime warning
x
x
Max lamp runtime almost reached
Lamp runtime exceeded
x
x
Max lamp runtime exceeded
Desktop resolution not valid
x
Desktop input signal resolution is out of
speci
fi
cation.
Wait box
x
x
An hourglass icon that is displayed during
processing
For safety reasons, the warning messages
Lamp runtime warning
and
Lamp runtime exceeded
will always
pop up during start-up of the projector. They can only be suppressed during projector runtime.
How to enable/disable Warning Messages?
1. Press
MENU
to activate the Tool bar
R59770324 SIM 5W 22/12/2011
183
Summary of Contents for SIM 5W
Page 1: ...SIM 5W User guide R59770324 06 22 12 2011 Downloaded From projector manual com Barco Manuals ...
Page 54: ...5 Setup 50 R59770324 SIM 5W 22 12 2011 Downloaded From projector manual com Barco Manuals ...
Page 194: ...Index 190 R59770324 SIM 5W 22 12 2011 Downloaded From projector manual com Barco Manuals ...