![background image](http://html1.mh-extra.com/html/barco/sim-5w/sim-5w_user-manual_4251408129.webp)
7. Advanced
How to reset the lamp runtime?
1. Press
MENU
to activate the tool bar
2. Press
→
to select the
Lamps
item
3. Press
↓
to pull down the
Lamps
menu
4. Use
↑
or
↓
to select
Reset Runtime
5. Press
→
to open the
Reset Runtime
menu
6. Use
↑
or
↓
to select the lamps to be reset
Image 7-138
7. Press
ENTER
A dialog box is displayed
Image 7-139
8. Use
←
or
→
, the numeric keys on the remote, or the keypad to change the serial number of the lamp (serial number 0000000 will
not be accepted).
9. Select
Accept
to reset the lamp runtime and to con
fi
rm the serial number of the new lamp
7.7.7
Clear lamp error
Lamp error
When a failure of one of the lamps has occurred, a lamp logo is displayed in the left corner of the screen. This logo will thus always
inform the user on a previous lamp error.
Once the error has been solved or/and the lamp has been replaced one can remove (clear) the lamp error.
If the error has been cleared without solving the lamp problem the logo will be shown at next lamp startup (projector startup for
example)
A lamp failing to startup will be noticed by a low light output of the projector since the projector goes in single
lamp mode.
In case of a lamp error contact the local Barco authorized technician
R59770324 SIM 5W 22/12/2011
125
Summary of Contents for SIM 5W
Page 1: ...SIM 5W User guide R59770324 06 22 12 2011 Downloaded From projector manual com Barco Manuals ...
Page 54: ...5 Setup 50 R59770324 SIM 5W 22 12 2011 Downloaded From projector manual com Barco Manuals ...
Page 194: ...Index 190 R59770324 SIM 5W 22 12 2011 Downloaded From projector manual com Barco Manuals ...