![background image](http://html1.mh-extra.com/html/barco/sim-5h/sim-5h_owners-manual_4251195030.webp)
4. Installation
Projector
HUB
To LAN
Image 4-15
Network connection
The port for ethernet communication is IP port 5401
The linking of projectors is treated in the section “Setup of the linked projectors in a multichannel system”
4.5.9.2
Network settings
What can be done?
These settings are used to set the Ethernet Communication parameters.
Following parameters are available :
MAC Address
MAC Address of the projector (This is a non-adjustable value programmed into the Ethernet
board).
IP Address (Current)
IP Address of the projector (This is a non-adjustable value ).
Subnet Mask
Subnet Mask (This is a non-adjustable value )
Gateway
Gateway (This is a non-adjustable value )
DHCP
DHCP setting:
•
Yes
: The projector will dynamically obtain its IP address from the DHCP server.
•
No
: The IP address needs to be entered manually. Note that when selecting
Fixed IP
the IP settings
fi
elds are enabled
IP Address
Fixed IP Address of the projector : this
fi
eld can be edited when Fixed IP is selected
Subnet Mask
Subnet Mask : this
fi
eld can be edited when Fixed IP is selected
Gateway
Gateway : this
fi
eld can be edited when Fixed IP is selected
Hostname
Hostname : this
fi
eld can be edited when DHCP is selected
26
R59770247 SIM 5H 04/06/2008
Summary of Contents for SIM 5H
