Barco SIM 5H, Owner'S Manual

Page: 102 / 173

7. Advanced
Image 7-104
7.5.2 Lamp runtime warning
What can be done ?
When the lamp has reached a predetermined runtime , a warning message will be displayed on the screen. The lamp runtime
warning can be set in a range from 30 to 200 hours. The runtime warning is displayed by default at 30 hours before end of lamp
lifetime.
How to set the lamp runtime warning ?
1. Press MENU to activate the Tool bar
2. Press → to select the Lamp item
3. Press ↓ to Pull down the Lamp menu
4. Use ↑ or ↓ to select Runtime warning...
Image 7-105
5. Press ENTER
A dialog box is displayed
Image 7-106
6. Use ← or → , the numeric keys on the remote, or the keypad to change the runtime warning setting.
7.5.3 Lamp mode
What are the different lamp modes ?
Single mode
The projector will always switch to the lamp with the shortest runtime when the difference between the runtimes of lamp1 and lamp
2 reaches
100 hours , switching from one lamp to another happens only at switching on of the projector and not during operation.
When the lamp fails or reaches its maximum runtime the projector switches automatically to the other lamp without interrupting the
projection.The failure is logged and the lamp will never be initialized in the future.
98 R59770247 SIM 5H 04/06/2008