![background image](http://html1.mh-extra.com/html/barco/s3-series/s3-series_user-manual_3891629124.webp)
6. EM GUI orientation
This menu provides:
•
A list of all the outputs already created on the system (e.g. Output1)
•
A button to automatically allocate all unassigned output connectors to an
output.
•
A button to manually allocate output connector(s) to an output.
•
A button to delete unused or obsolete output(s).
How to Auto create Outputs
The “Auto Create Outputs” button allows all 2K outputs that are not assigned to an output con
fi
guration to automatically assign to an
output con
fi
gurations. Output connectors that are already assigned to output con
fi
gurations will not be affected. The picture below
shows what occurs when the button is pressed. Since there are 12 output connectors not assigned, all 12 Output con
fi
gurations are
automatically assigned. Out1 contains the output connector on the 1st output card in slot 1, etc
Image 6-22
Since the software assigns automatically only 2K outputs, Dual link or 4K outputs need to be con
fi
gured manually. See
How to add
output
section below.
The unit will query the connected device on its output for a preferred EDID and try to assign that as the output resolution and frame
rate. If no devices are connected, a standard HD resolution with the native rate of the EMP is assigned as frame rate.
Next to the con
fi
guration name is the name of the Destination where the output is assigned. If the Output is not assigned to any
Destination, then the name will be “N/A”.
The software by default names outputs as “Output 1, 2, 3...” The user can rename each output by double
clicking on the name and type in the new name in the blue box.
120
R5905948 EVENT MASTER DEVICES 17/07/2017
Summary of Contents for S3 series
