Barco RLM W Series Reference Manual Download Page 60

Page: 60 / 151

5. Configurator

Image 5-13
Edit projector properties via right click

5.8

Con

guration preview

Projector status

The border color around the pictograph indicates the projector status.

Green

: projector is online and there is communication with the projector.

Grey

: projector is of

ine.

Red

: projector is online but there are warnings about the use of the projector.

Shaded

: projector is disabled.

5.9

Con

guration properties

What is available?

The following properties are available:
•

author

name.

•

created on

: date and time when the con

guration is created (read only).

•

path

: full path where the con

guration is saved (read only).

•

description

: description which identi

es the con

guration.

How to change

1. Click

Con

guration

→

Con

guration Properties

(a1).

Or,
right click in the preview pane of the con

guration preview, but not on a pictograph (a2). (image 5-14)

The

Con

guration properties

dialog box opens (b1, b2).

R59770513 RLM W-SERIES 28/07/2010

Summary of Contents for RLM W Series
























































































































































Search results

Summary of Contents for RLM W Series

Reviews:

Brands by name

Popular brands

Barco RLM W Series, Reference Manual

Search results

Summary of Contents for RLM W Series

Reviews:

Brands by name

Popular brands