![background image](http://html1.mh-extra.com/html/barco/rlm-series/rlm-series_user-manual_4248504083.webp)
2. Basic Commands
Data[1] = 0 : disable
Data[1] = 1 : enable
2.41.4
Blanking, Write
Description
Blanks the display.
Four blanking methods are possible:
•
Top
•
Bottom
•
Left
•
Right
The blanking may also be chosen to be performed on the display or on the image file (saved in the image file).
Command
Top blanking:
Command [0]
\x20
Command [1]
\x4c
Bottom blanking:
Command [0]
\x20
Command [1]
\x4d
Left blanking:
Command [0]
\x20
Command [1]
\x4e
Right blanking:
Command [0]
\x20
Command [1]
\x4f
Data
byTypeBlanking : one byte describing the type of blanking
Data [0] = 0 : blanking on image file (saved in image file)
Data [0] = 1 : blanking on display
Wvalue : Unsigned word (2 bytes) representing the number of pixels to be blanked.
Data [1] = msb
Data [2] = lsb
The maximum number of pixels which can be blanked depends on the native resolution of the panels
The panel size can be read using the Panel Size read command.
R5976884 RLM SERIES 04/04/2006
81