![background image](http://html1.mh-extra.com/html/barco/rlm-series/rlm-series_user-manual_4248504021.webp)
2. Basic Commands
2.4
Projector ON/OFF, Write
Description
Switching ON/OFF the projector
Command
Switching the projector ON
Command [0]
\x65
Switching the projector OFF
Command [0]
\x66
Example
Switches the projector ON
Transmit
Start
\xfe
Projector address
\x01
Command[0]
\x65
Checksum
\x66
Stop
\xff
Receive (acknowledge)
Start
\xfe
Projector address
\x01
Command[0]
\x00
Command[1]
\x06
Checksum
\x07
Stop
\xff
2.5
Projector’s Status, Read
Description
Reads the Projector’s Status
Command
Command [0]
\x67
Returned Data
Data [0] = unsigned byte
bit7
bit6
bit5
bit4
bit3
bit2
bit1
bit0
Not used
Not used
Cool down cycle
active = 0
inactive = 1
Not used
Not used
Not used
Textbox
ON = 1
OFF = 0
Projector
ON = 1
OFF = 0
R5976884 RLM SERIES 04/04/2006
19