![background image](http://html1.mh-extra.com/html/barco/reality-909/reality-909_installation-manual_474323021.webp)
4. Installation Setup
4. INSTALLATION SETUP
W
ARNING
:
RISK OF ELECTRIC SHOCK! TURN OFF THE PROJECTOR AND UNPLUG THE POWER CORD!
This installation should only be done by BARCO authorized service personnel.
4.1 Scan Adaptation
Scan Connectors
The scan connectors must be placed in the correct position which correspond to the desired scanning configuration.
Access to the Scan Connectors
To get access to the scan connectors it is necessary to remove the top cover and to lift up the protection plate on the top of the
projector.
1. Turn the lock screw on top of the projector with a screwdriver or a coin a half turn counter clock-wise.
Image 4-1
Turn the lock screw on top of the projector
2. Remove the hinge pivots.
R5976257 BARCO REALITY 909 15/03/2003
17
Summary of Contents for Reality 909
