![background image](http://html1.mh-extra.com/html/barco/r9861520na/r9861520na_installation-manual_4042393071.webp)
6. CSE-200 Configurator
Image 6-42
Energy savers
How to change the display timeout and standby mode
1. Log in to the
Con
fi
gurator
.
2. Click
System
→
Energy Savers
.
3. To set a display time out, move the slider to the left or to the right until the desired standby timeout is reached.
4. To select a standby mode, select the radio button before
Eco standby
or
Deep standby
.
6.26 Buttons
About Buttons
It is possible to update the software of the Buttons over Wi-Fi. All Buttons used with the Base Unit are indicated in the Buttons
List. The list contains the state, the signal strength, the serial number, the
fi
rmware version, the number of connections and last
connection.
Image 6-43
Buttons
R5900023 CLICKSHARE CSE-200 13/07/2016
59
Summary of Contents for R9861520NA
