![background image](http://html1.mh-extra.com/html/barco/r92112011/r92112011_user-manual_4242641129.webp)
7. Advanced
Uploading a Beta plane
fi
le
Beta planes must be uploaded in the following projector directory (accessible via FTP) :
/D/display/Softedge
The
fi
le must be named as follows :
beta.tiff
The free storage capacity on the D-drive is about 8 MB. it is needed to store the image
fi
les, geometry
fi
les, factory backup, Alpha
planes and Beta planes. Practically, about
6 MB
will be available for the Alpha + Beta plane.
The Beta plane will only be applied if it has been activated in the
Black level...
menu’s dialog box (see proce-
dure below)
How to activate a beta plane ?
1. Press the
MENU
key to activate the Tool bar.
2. Push the cursor key
←
or
→
to highlight
Display setup
3. Push the
↓
key to pull down the menu.
4. Push
↓
or
↑
to select
Soft edge
5. Push the
→
key to pull down the menu.
6. Push the cursor key
←
or
→
to highlight
Black level...
Image 7-140
7. Press
ENTER
A dialog box will be displayed.
Black Level
Internal
Beta planes
Planes
Level
0
Image 7-141
8. Use the arrows to select the
Beta planes
check box and press
ENTER
Note:
It will take a certain time for the beta plane to be applied
7.8.5.5
Blanking
What can be done?
Blanking or hard edging affects only the edges of the image and is used to frame the projected image on the screen and to hide
unwanted image information (or noise) or to put two images next to each other without overlap (soft edge).
R59770066 SIM 7Q SERIES 08/12/2014
125
Summary of Contents for R92112011
