Barco R9050100 User Manual Download Page 77

Page: 77 / 233

9. Image menu

9.3.1

Contrast

About Contrast

The contrast function is used to adjust the contrast between the light and dark areas of the displayed image.

How to change the contrast?

1. Press

MENU

to activate the menus.

2. Use the

▲

▼

key to select

Image

and press

ENTER

3. Use the

▲

▼

key to select

Image settings

and press

ENTER

4. Use the

▲

▼

key to select

Contrast

and press

ENTER

The Contrast progress bar appears.

5. Use

◄

►

to change the contrast.

The higher the value, the higher the contrast.

Image 9-3

Image 9-4

Image 9-5

Image 9-6

9.3.2

Brightness

About Brightness

The Brightness function is used to adjust the overall light output.

How to change the brightness?

1. Press

MENU

to activate the menus.

2. Use the

▲

▼

key to select

Image

and press

ENTER

3. Use the

▲

▼

key to select

Image settings

and press

ENTER

4. Use the

▲

▼

key to select

Brightness

and press

ENTER

The Brightness progress bar appears.

5. Use

◄

►

to change the brightness.

R59770021 CLM R10+ 15/03/2010

Summary of Contents for R9050100










































































































































































































































Search results

Summary of Contents for R9050100

Reviews:

Related manuals for R9050100

Brands by name

Popular brands

Barco R9050100, User Manual

Search results

Summary of Contents for R9050100

Reviews:

Related manuals for R9050100

Brands by name

Popular brands