![background image](http://html1.mh-extra.com/html/barco/r9040411/r9040411_user-manual_4242996023.webp)
2. Installation
Image 2-13
Lens interface plate, screening UP to the top side
3. Mount the assembly (lens + interface plate) on the lens holder
Insert and tighten the 4 screws with one hand while supporting the lens with the other hand
Caution:
Mind the orientation of the lens assembly: the screenings
UP
and
TOP
must be oriented upwards (table con
fi
gura-
tion!).
Image 2-14
Lens installation
2.5
Projector con
fi
guration
C
AUTION
:
Projectors in ceiling con
fi
guration must have their second pump being connected mechanically
and electrically! If no second pump is present in the projector, the corresponding kit must be installed
fi
rst.
Contact a Barco trained and certi
fi
ed technician.
The different con
fi
gurations
Depending on the installation the projector can be mounted in different ways, the 4 different con
fi
gurations are:
1.
Rear/Ceiling
2.
Rear/Table
3.
Front/Ceiling
4.
Front/Table
R59770718 GALAXY NW SERIES 20/06/2013
17
Summary of Contents for R9040411
