![background image](http://html1.mh-extra.com/html/barco/r9040411/r9040411_user-manual_4242996189.webp)
6. Maintenance
3. Slide the lamp to the right side of the projector (= towards the connector)
Image 6-15
Lamp: installation
4. Push the lamp to plug in the connectors
-
cathode
-
anode
-
lamp info connector (bottom side of the lamp)
Caution:
If the lamp doesn’t slide in smoothly, gently wiggle it until it does.
Since the lamp info connector has some backlash, it might not be fully in line with its plug (especially if the projector
is not in table mode) making it hard to get it connected. By wiggling the lamp, the correct alignment of the lamp info
connector can be easily achieved.
5. Fix the lamp using the two no-drop screws
Image 6-16
Lamp: screws
6. Install the fan outlet (muf
fl
er) (see concerning chapter)
7. Install the rear cover (see concerning chapter)
6.6.6
Installing the fan outlet
Necessary tools
Slotted screwdriver 5 mm
How to install the fan outlet?
1. Put the fan outlet in the right position
R59770718 GALAXY NW SERIES 20/06/2013
183
Summary of Contents for R9040411
