![background image](http://html1.mh-extra.com/html/barco/r9040411/r9040411_user-manual_4242996139.webp)
5. Advanced
Image 5-153
7. Press
ENTER
Common color coordinates are calculated and
fi
lled in the desired values.
5.9.7.6
Changing color reproduction
Concept
Dynacolor allows setting a desired color reproduction - within the limits of the device - by digitally changing the primary and secondary
color coordinates. In multiple channel display systems, it is used to
fi
ne tune the colors of all devices to create color uniformity all
over the full image.
If Dynacolor is disabled, the device can display any combination of its native primary colors R (red), G (green) and B (blue). A set
of all combinations of the device’s primary colors is called the
color gamut
of that device. It can be presented as a
color triangle
in the CIE chromaticity diagram where each vertex is de
fi
ned by the x and y coordinate of the
primary colors
. The
white point
W
can be moved within the color triangle by changing its x and y coordinates, resulting in different reproduction or temperatures.
Due to the tolerance on optical components the X, Y value of the primary colors of different devices is slightly different.
x
y
0
0.4
0.2
0.6
0.8
0
0.4
0.8
0.6
0.2
G
B
R
W
Image 5-154
Color triangle: native color gamut of a device
R59770718 GALAXY NW SERIES 20/06/2013
133
Summary of Contents for R9040411
