![background image](http://html1.mh-extra.com/html/barco/r9006330/r9006330_user-manual_474305066.webp)
RLM W14 17/04/2017
58
11.Alignment
11.8 Lens Memory
There are three functions available after adjusting zoom, focus and lens shift position.
Save Memory
it is used to store current zoom, focus, and lens shift position settings into the designated memory among 3 memories. Users
can repeat the above procedure to store up to 3 lens memories.
Load Memory
it is used to recall the previously stored memory from among 3 memories.
Clear Memory
it is used to clear the previously saved settings per the designated memory.
11.9 Dynamic Contrast
Use this function to configure the projector to automatically adjust image contrast from the source upon start up or shut
down. When activated, the projector will dynamically adjust the image contrast from the beginning of the projection until the
content has ended.
11.10 Gamma
Different Gamma settings will affect viewers' perception of the image. Generally speaking, for images that are darker, it
is recommended that Gamma be set higher to yield better image quality in darker regions by sacrificing details in brighter
areas. In contrast, when projecting brighter images, you can set the Gamma lower to give up details in the darker areas to
make the brighter areas (i.e. clouds) more visible.
You can choose from five different gamma settings (1.8, 2.0, 2.2, 2.35 and 2.5) on the projector. The projector's default
gamma value is at 2.2.
Every setting has precisely defined phases to display all primary colors (red, green, blue) and secondary colors (yellow, cyan,
magenta) in millions of pixels. Changing any number in the setting will change the resulting color and rearrange the color
"triangle".
DICOM SIM. is for training purpose - not for real medical diagnosis.
When DICOM mode is active, Scenergix will not be available (Greyout).
11.11 Internal Patterns
The projector comes with some standard built-in patterns for testers to calibrate the equipment. These include:
0 = Off
1 = Color Bars
2 = Hatch
3 = Burst
4 = Red
5 = Green
6 = Blue
7 = White
8 = Black
9 = TI-Red
10 = TI-Green
11 = TI-Blue
12 = TI-Ramp
13 = Warp
Summary of Contents for R9006330
Page 1: ...RLM W14 User manual...
Page 92: ......