![background image](http://html1.mh-extra.com/html/barco/r9004460/r9004460_owners-manual_4265878014.webp)
2. Installation Guidelines
Special Care for Laser Beams
Special care should be used when DLP projectors are used in the same room as performant laser equipment. Direct or indirect hitting
of a laser beam on to the lens can severely damage the Digital MicroMirror Devices™ in which case there is a loss of warranty
Which screen type ?
There are two major categories of screens used for projection equipment. Those used for front projected images and those for rear
projection applications.
Screens are rated by how much light they reflect (or transmit in the case of rear projection systems) given a determined amount
of light projected toward them. The ‘GAIN’ of a screen is the term used. Front and rear screens are both rated in terms of gain.
The gain of screens range from a white matte screen with a gain of 1 (x1) to a brushed aluminized screen with a gain of 10 (x10)
or more. The choice between higher and lower gain screens is largely a matter of personal preference and another consideration
called the Viewing angle. In considering the type of screen to choose, determine where the viewers will be located and go for the
highest gain screen possible. A high gain screen will provide a brighter picture but reduce the viewing angle. For more information
about screens, contact your local screen supplier.
What image size? How big should the image be?
The projector is designed for projecting an image size : min 1.00m (3.3ft) to max 15 m (49.2ft) (depending on the ambient light
conditions), with an aspect ratio of 1.9:1.
2.2
Restricted Access Location
Installation in a Restricted Access Location
The XLM HD30 can only be installed in a Restricted Access Location.
What is a Restricted Access Location (Definition) ?
Definition of a Restricted Access Location:
A location for equipment where both of the following paragraphs apply:
•
Access can only be gained by SERVICE PERSONS or by USERS who have been instructed about the reasons for the restriction
applied to the location and about the precautions that shall be taken.
•
Access is through the use of the TOOL or lock and key, or other means of security, and is controlled by the authority responsible
for the location.
What is the Reason for the Applied Restriction?
The Air exhaust on the rear of the Projector can reach high temperatures due to the High Light Output Range of the installed lamp.
Image 2-1
The air exhaust on the rear side of the projector.
W
ARNING
:
Do not touch this Air Outlet Grill when the projector is running. Respect a cool down period for
at least 10 minutes after the projector has been switched off before touching this Grill .
10
R59770014 XLM HD30 07/07/2006
Summary of Contents for R9004460
