Barco Prometheus III, Installation Manual

Page: 42 / 200

R5906897 /02 Prometheus III 42
5.1 Supported mounting position
General
The Standalone cooler can be positioned flat on a solid surface (Floor Mounting) or fixed onto the wall in
portrait or landscape modes (Wall mounting).
A
B
C
Image 5-1
A Wall Mounting (Landscape).
B Wall Mounting (Portrait).
C Floor Mounting.
Details and limitations
Depending the mounting option chosen, some limitations must be considered:
• Floor mounting : When this option is chosen, the cooler is installed on a flat and stable surface, in
horizontal position. Four feet correctly distributed (2 on each side) allow stabilize the device. The cooler
could be tilted forward or backward, but for security reasons it is strongly recommended to let the unit in
horizontal position, the best way to avoid the potential hazards of falls and slips.
360°
1
x4
Image 5-2
1 Four feet allow stabilize the unit.
Stacking Standalone coolers: It is NOT allowed to stack multiple cooler modules on top of each other. The
air intake of the upper cooler would take in the
“ hot ” air of the lower cooler, even at a distance of 1m apart.
Physical installation stand alone cooler