Barco Prometheus III, Installation Manual

Page: 23 / 200

R5906897 /02 Prometheus III 23
1
Image 2-1
1 Outlet
The connection between the exhaust outlet and the external blower must be done with a certified AC power
supply cord of minimum 0,75 mm² or 18 AWG and minimum 300V.
Projector weight
Do not underestimate the weight of the Barco Prometheus III.
The projector weights are without lens and without cooler. Be sure that the pedestal on which the projector has
to be installed is capable of handling the complete load of the system.
Projector Weight
Prometheus III ±147 kg (±324 lb)
The cooler weights ±32 kg (±70.6 lb).
Barco offers a pedestal for the Prometheus III. This universal pedestal allows a solid and easy setup
of the projector. The universal pedestal has a separate compartment to install the UPS unit for the
Prometheus III. Futhermore, the universal pedestal contains a standard 19
” rack to build in the
projector peripherals such as alternative content switchers.
2.2 About the delivered packages
General
The complete projection system is delivered in 2 packages:
• Projector
• Stand alone pack accessories
The stand alone accessories contain the following content:
• 2 cooling units, each 1000W
• Cooling unit base plate
• Cooling unit housing
• 2 Cooling unit air filters
• Stand alone frame
• Stand alone hoses (4x) and cables (4x) with a length of 5 m
• Protection grid for cooling units
General