Barco Prometheus III, Installation Manual

Page: 56 / 200

R5906897 /02 Prometheus III 56
1
2
3
3
Image 5-23
1 cooler housing
2 Frame
3 cooler inputs
2. Fixate the first U-bracket to the frame with 2 screws (M5x8) as shown in the following drawing.
Note: The two U-Brackets are not fixed in same manner. Here, the concerned U-bracket, is situated in the
lower left corner of the housing when you look at the device on the side of the cooler inputs.
Image 5-24
3. Fixate the second U-bracket to the frame with only one screws (M5x8) as shown in the following drawing.
There is a space of more or less 2 centimeters between the frame side and the bracket.
Note: The two U-Brackets are not fixed in same manner. Here, the concerned U-bracket, is situated in the
lower right corner of the housing when you look at the device on the side of the cooler inputs.
Physical installation stand alone cooler