![background image](http://html1.mh-extra.com/html/barco/prometheus-i/prometheus-i_safety-and-instruction-manual_4205255068.webp)
4. Lamp & Lamp House
4.9
Check if anode support must be provided with a plain washer
Necessary tools
•
2.5mm Allen wrench.
•
19mm open-end wrench.
Necessary parts
Plain washer, stainless steel, ØD = 18mm, Ød = 6.4mm, thickness = 1.6mm. (V3673807).
How to check if the anode support must be provided with a plain washer?
1. Turn the thumbscrew of the Z direction counterclockwise as for as possible (minimum Z position of the xenon lamp).
2. Check if the anode pin of the xenon lamp remains supported by the anode support.
Image 4-47
3. In case the anode pin drops out the anode support place a plain washer (reference 3) between the UV blocker and anode support
(reference 4). Use a 2.5mm Allen wrench to loosen/fasten the screw (reference 1) of the anode support. Use a 19mm open-end
wrench to capture the anode support.
1
2
4
3
Image 4-48
64
R5905963 PROMETHEUS SERIES 09/03/2015
Summary of Contents for Prometheus I
