Barco Projector Toolset, Reference Manual

Page: 31 / 245

3. Menus
3.8.1 About snapshots
Overview
At any moment the settings for a con fi guration can be saved in a snapshot fi le. This snapshot fi le can be
loaded again to create the same situation as when the snapshot was taken.
A snapshot can contain:
•
All settings
• All layout settings
• All input settings
• Lamp settings
• Projector settings
Snapshot
A snapshot is a collection of settings at a given point of time for a con fi guration
3.8.2 Managing snapshots
Overview
When opening the snapshot window an overview of all available snapshots is given. A snapshot fi le is
built up as a tree of settings.
To open this tree of settings, click on the ’+’ sign to expand a branch.
A yellow warning symbol in front of the snapshot name means that something inside the snapshot does
not correspond with the current active con
fi guration. Expand the snapshot tree to see the differences.
Such a snapshot can be applied to the current con fi guration but only the corresponding setting are loaded
and for the other settings, the current values remain in place.
Some examples when a warning symbol can be displayed:
• projector not (anymore) in the con fi guration
• inputs on projector are swapped, or missing.
When a snapshot is selected, the name of the snapshot is yellow.
R5976924 PROJECTOR TOOLSET 16/04/2009 27