Barco Projector Toolset, Reference Manual

Page: 137 / 245

8. Configurator, Projector adjustment settings
4. Select White balance blue and adjust the blue white level (gain) on a minimal value.
Note: This minimal value is not necessary , provided that the 2 other colors are not in fl uencing too
much the color to be adjusted, in fact the aim is to minimize the effect of the two other colors
since there is a risk of reaching too soon the transition (bright spots) due to the contribution of
these two other colors signals.
5. Select White balance green and adjust the Green white level (gain) until bright spots appear on the
screen.
6. Select White balance blue adjust the Blue white level (gain) until bright spots appear on the screen.
7. Select White balance red adjust the Red white level (gain) until bright spots appear on the screen.
The projected image should now be noisy neutral gray.
8.5.10 Input color temperature
Projector white will provide maximum projector light output. The calibrated ’Broadcast
: 3200’, ’Film : 5400’, ’Video : 6500’ and ’Computer : 9300’ presets will provide optimum
color tracking.
A prede fi ned color temperature
1. Select a window and click on Adjust . (image 8-28)
The Input dialog box opens.
2. Click on Input Color Temperature .
The Input color temperature dialog box opens. The content depends on the selection.
Color temperature on input Color temperature can be adjusted as desired for the selected input
Color temperature full
screen
Color temperature is adjusted via the Color Space (gamut) in the Color
alignment tab
3. Select Color temperature on input . (image 8-29)
4. Click on Change.. .
The color temperature selection menu opens.
5. Select the desired value and click Open .
The chosen color temperature is applied to the input.
R5976924 PROJECTOR TOOLSET 16/04/2009 133