Barco PHWU-81B, User And Installation Manual

Page: 85 / 143

8. Lamp relay
8. LAMP RELAY
Overview
Using the lamp relay function, you can project images continuously. The lamp relay function automatically rests or switches the
lamps. The lamp relay is performed when LAMP SELECT in the INSTALLATION 1 menu is set to DUAL or SINGLE in the AD-
VANCED menu of the OSD Lite menu.
8.1 Setting the lamp relay interval, LAMP SELECT is set to DUAL
Either of the lamps is automatically put to rest.
How to set
1. Display the INSTALLATION 1 menu.
2. Select LAMP SELECT by pressing the ▲ or ▼ key.
LAMP SELECT
DUAL
Image 8-1
3. Press the ENTER key.
LAMP SELECT
LAMP SELECT DUAL
Image 8-2
4. Select DUAL by pressing the ◄ or ► key.
5. Press the ENTER key.
6. Select LAMP RELAY by pressing the ▲ or ▼ key.
LAMP RELAY 1H/24H
Image 8-3
7. Select 1H/24H or 2H/1W by pressing the ◄ or ► key.
1H/24H
Select this setting when the lamp is operated at a speci fi ed time of the day. During the continuous
projection, LAMP 1 or LAMP 2 is automatically turned off for 1 hour in 24 hours. After the interval is set,
the lamps are turned off for 1 hour alternately at the speci
fi ed interval.
Illuminating
Off
LAMP 1
LAMP 2
1 2 3 4 5 6 7 8 (days)
At the time of power-on or menu setting
Image 8-4
2H/1W
During the continuous projection, LAMP 1 or LAMP 2 is automatically turned off for 2 hours in a week.
After the interval is set, the lamps are turned off for 2 hours alternately at the speci
fi ed interval.
Illuminating
Off
LAMP 1
LAMP 2
1
2 3 4 5 6 7 8 (days)
At the time of power-on or menu setting
Image 8-5
8. Press the ENTER key.
R5905597 PHXX SERIES 20/05/2014 81