
4. Getting started
The MUTE screen appears. “MUTE ON - PRESS ANY KEY TO EXIT” is displayed for 3 seconds. Then, the mechanical shutter
is closed and the projector goes into the BLANK mode.
2. To cancel the BLANK mode, press any key on the remote control.
4.8
Auto position mode
Act as follow
When the image supplied from the computer is displaced, carry out the following procedure.
1. Project a bright image containing as many texts and characters as possible.
2. When the screen saver has been enabled, disable it.
3. Press the
HOME
key to display the OSD Lite menu and press the
OK
key.
The
INPUT
menu is displayed.
4. Press the
▲
,
◄
,
▼
or
►
key to select
AUTO POSITION
.
Image 4-11
The projector automatically makes optimum positional settings for the input signal.
5. If the projected image is still displaced even after carrying out the
AUTO POSITION
several times, refer to the procedure to adjust
computer images.
6. When you carry out this procedure with a dark image, the image may be displaced.
R5905597 PHXX SERIES 20/05/2014
37
Summary of Contents for PHWU-81B
