![background image](http://html1.mh-extra.com/html/barco/ph-series/ph-series_user-and-installation-manual_4202641098.webp)
10. Lamp replacement
Image 10-1
10.3 Lamp replacement
C
AUTION
:
Only authorized service personnel are allowed to remove the covers.
How to replace
1. Unplug the power cord from the outlet or appliance inlet.
2. Loosen two screws (a) on the rear and two screws (b) on the side that are securing the side cover (c) using a Phillips screwdriver.
(c)
(b)
(a)
Image 10-2
3. Slide and remove the side cover towards the rear.
Image 10-3
4. Loosen two screws (d) that are securing the lamp cover using a Phillips screwdriver and remove the lamp cover (e) from the
projector.
94
R5905597 PHXX SERIES 20/05/2014