![background image](http://html1.mh-extra.com/html/barco/ph-series/ph-series_user-and-installation-manual_4202641031.webp)
3. Connections
3.5
Installing the covers
Installing the rear cover
1. Insert the rear cover (e) into the projector and tighten four screws (d) on the rear cover using a Phillips screwdriver.
(d)
(e)
Image 3-12
Rear cover mounting
Installing the side cover
1. Insert the side cover into the projector and tighten two screws (a) on the rear and two screws (b) on the side of the side cover
(c) using a Phillips screwdriver
(a)
(b)
(c)
(a)
(b)
(c)
Image 3-13
Side cove mounting
R5905597 PHXX SERIES 20/05/2014
27