![background image](http://html1.mh-extra.com/html/barco/overview-d-series/overview-d-series_user-manual_4198086048.webp)
6. Menu structure
Barco - OverView D series - Doc-3353-2 - user's manual - Revision 04 - April 2005
_______________________________________________________________________
6-11
.
Auto Lamp Switch hours
Hours (12 to 500)
24
Figure 6-14
Lamps menu, defining auto switch cycle time
Proceed as follows to set the switching time:
•
Use the cursor key to highlight the input field
•
Use the numeric keys on the IR Remote-Control to enter the desired hours
•
Press
Enter
to select.
6.5.3
History
Use this command to see the list of serial numbers and the current runtime of the lamps
Brightness
Status
OverView DG
Operation
Active Lamp
Lamp Optimization...
Mode
Runtimes...
Reset runtime
History...
Lamps
Figure 6-15
Lamps menu, History
Proceed as follows to view the lamp history:
•
Use the cursor key to highlight
History
•
Press
Enter
to select.
A dialog is displayed which shows the serial numbers and runtimes of the employed lamps.
Lamp history
Lamp
Serial no.
Runtime
Current lamps
Lamp Top
348
Lamp Bottom
279
Figure 6-16
dialog showing the history of the lamps of the projector