![background image](http://html1.mh-extra.com/html/barco/overview-d-series/overview-d-series_user-manual_4198086031.webp)
4. Operation
Barco - OverView D series - Doc-3353-2 - user's manual - Revision 04 - April 2005
________________________________________________________________________
4-2
4.1
Cabling
All necessary cables are connected to the O
VER
V
IEW
D projection module.
4.1.1
Power
Check the power rating on your outlet before connecting the projection modules to the
wall outlet or to a power strip. Contact your facilities manager or a qualified electrician if
you are not sure what type of power is supplied to your building.
The devices are designed to operate with single-phase power systems having a
grounded neutral conductor. To reduce the risk of electrical shock, do not plug into any
other type of power system.
4.1.2
Data
The projection units of an O
VER
V
IEW
D Display Wall are connected to the graphic cards of a Barco Controller. The
projector as a DVI interface.
Projection modules with SXGA+ resolution feature two DVI inputs, thus allowing to
connect two sources simultaneously. The source to be displayed then is selected vie the
OSD, as well as the behavior in case a source fails, cf.