![background image](http://html1.mh-extra.com/html/barco/overview-d-50/overview-d-50_installation-manual_4197749080.webp)
8. Final Adjustment and Configuration
OverView D 50" – DOC-3303-5 – installation manual – Revision 10 – September 2006
September 2006
September 2006
September 2006 ________________________________
________________________________
________________________________
________________________________________________________
________________________
________________________
________________________8-12
8.5.4
Color/Brightness
Figure 8-16
Service Menu, Color/Brightness
8.5.4.1
Color Coordinate Adjustment
Color Adjustment has to be done by CAST!
Only very experienced personnel in possession of a spectrometer should access this
menu!
In case there is an urgent need to use this menu item, make sure that White Peaking is
set first.
Color adjustment is only valid for one White Peaking value.
This menu provides some essential information for the ASIC: the factory colors of the DLP engine and the desired
target colors.
The color locations for DLP are indicated in coordinates of the x, y color space (CIE 1931).