![background image](http://html1.mh-extra.com/html/barco/overview-cdg67-dl/overview-cdg67-dl_installation-manual_4192338059.webp)
5. Geometric adjustment
Barco – OverView cDG67-DL – R5976624– installation manual – Revision 03 – August-2005
________________________________________________________________
5-3
5.16
Installing the standard and design trim
TRM01
The trim consists out of two entities: the standard trim which is merely functional and the design trim which
has an esthetical function. Start with snapping the plastic fixation parts, ID-fix (R822012), onto the profiles.
These parts do not only fit on the profiles but also on themselves. Click 4 ID-fix in the horizontal direction and 3
in vertical direction on both sides of the structure for each screen. The distance between the plastic parts has to
be equally distributed. On the horizontal top side the positions will be defined by the stitch plate-support.
Collect all necessary parts of the trim. Besides the trim profiles, brackets, straight and angled ones are included
in the delivery of the standard trim. To attach the standard trim proceed as follows: Assemble the corner
brackets with the screws integrated in the profile. Connect all vertical profiles for the left and right side and all
the horizontal profiles for the bottom and top side by means of the straight brackets. Assemble the vertical trim
by clicking it on to the structure by means of the ID-fix. Finish the trim by mounting the finishing corners.