Installation
Barco - OV-808, OV-815– R599874 – installation manual – revision 01– November 2007 ___________________________________________________________ 63
5.23
Grounding
Step 88
Every support comes with a grounding kit which
consists of a grounding wire (5m), the required
fixation material and the label.
The wire is mounted on every second column, to the
vertical profile, using a self tapping screw.
In case of a linear setup, use one of the holes
provided for the polygonal connection kit. (Use one
of the not-required screws of the pedestals or of the
darkboxes or take one out of the spare part kit.)
In case of a curved setup, mount the grounding kit to
the connection facility for linear setup.
Always apply the washer, the cable lug, the spring
washer, and then insert and tighten the screw.
(You have to use self tapping screws! The fixation
screw included in the grounding kit is not self
tapping).
Finally apply the label!
Please note:
Connection of the grounding wire to the power net of
the customer has to be done by a qualified
electrician!
Barco only provides the connection to the display
wall!
Summary of Contents for OV-808
Page 1: ...Installation manual OV 808 OV 815 R599874 ...
Page 15: ......
