![background image](http://html1.mh-extra.com/html/barco/nw-12/nw-12_user-manual_3850258129.webp)
7. Advanced
7.9.6.2.1
Introduction
Although DynaColor can also be used in case of a single projector to force a desired color reproduction, we
will cover only the case where multiple projector have to be color matched using DynaColor.
Standard Dynacolor adjustment procedure (multiple projectors)
The adjustment of Dynacolor consists of :
1.
Measuring the color values for each projector (Calibration procedure)
2.
Calculating the common values
fi
lling them in the desired value of every projector
In
fi
tec Dynacolor adjustment procedure (in the projector)
The adjustment of Dynacolor for In
fi
tec consists of :
1.
Measuring the color values for each
fi
lter (Calibration procedure) in In
fi
tec mode
2.
perform
fi
lter Matching the common values will be
fi
lled in automatically by the projector
The In
fi
tec Dynacolor calibration can also be done over multiple projectors. Common values must be calcu-
lated and
fi
lled in every projector.
In case one uses linked Dynacolor, the master projector will calculate the common values and force them on
all (the linked) slave projectors
7.9.6.2.2
Calibration for the standard mode (for multiple projectors)
What has to be done ?
The calibration of Dynacolor consists of measuring the color values of each projector. The measurements have to be done in a
dark environment. Make sure all external lights are off (even a PC screen can produce too much unwanted light). Use a light
meter (PR655, LMT, …) and at a
fi
xed position during the entire measurement. In the procedure below we consider a system of 2
projectors.
C
AUTION
:
Only to be done by quali
fi
ed personnel ! Never change the values if not needed. Altered color
values will not guarantee optimal image reproduction.
How to calibrate Dynacolor for projector 1 ?
1. Select
Set1
(see procedure above)
2. Press
Calibrate
in the Dialog box
A red full screen test pattern is displayed.
3. Press
ENTER
R59770286 NW-12 25/09/2008
125
Summary of Contents for NW-12
