![background image](http://html1.mh-extra.com/html/barco/nw-12/nw-12_user-manual_3850258114.webp)
7. Advanced
Values
Description
Warning
Time set at which a warning is generated. Using the lamp longer than the maximum run time
may damage the projector
Number of strikes
Total times the lamp is started up
Hardware :
Serial number
Unique serial number of the lamp
Article number
Article number of the lamp
EEPROM version
version of the EEPROM used in the lamp housing
Table 7-5
Lamp Information
How to display the lamp info ?
1. Press
MENU
to activate the Tool bar
2. Press
→
to select the
Lamp
item
3. Press
↓
to Pull down the
Lamp
menu
4. Use
↑
or
↓
to select
Info...
Image 7-102
5. Press
ENTER
A text box is displayed
Image 7-103
7.7.2
Lamp runtime warning
What can be done ?
When the lamp has reached a predetermined runtime , a warning message will be displayed on the screen. The lamp runtime
warning can be set in a range from 30 to 200 hours. The runtime warning is displayed by default at 30 hours before end of lamp
lifetime.
110
R59770286 NW-12 25/09/2008
Summary of Contents for NW-12
