Barco - NSL-4601 - User manual _______________________________________________________ 7
Important notices, product safety precautions and package & storage
2.3
Safety precautions
2.3.1
Earthing
WARNING
:
The display unit must be earthed correctly. Verify that the power cable is plugged into a
standard 3-pin power outlet which is effectively earthed. When using extension cords, make
sure that they contain a grounded connection. If in doubt, contact a qualified electrician.
Ignoring this warning may lead to personal injury or death.
2.3.2
Electrical warnings and cautions
•
Do not power the unit with other input sources as specified in the technical
specifications.
•
Always power-down the unit before disconnecting the power cable.
•
Unplug the display unit from the power source when not in use.
IMPORTANT
:
Immediately unplug if:
•
the power supply cord is damaged.
•
the unit has been dropped or the cabinet is damaged.
•
the unit does not operate normally by following the operation instructions.
WARNING
:
Do not remove the cover without authorization. Removal of the cover by non-qualified
personnel can cause personal injury.
2.3.3
Environmental cautions
•
Do not use the display unit in a dusty or damp room.
•
Do not submit the display unit to heavy shocks and/or vibrations.
•
Do not cover the display unit while in operation to avoid overheating.
•
Do not expose to direct sunlight.
•
Do not use the display at extreme limits of temperature and humidity range.
Storage and operating limits are specified in the technical specifications of
the unit.
2.3.4
Requirement for dusty environments
The room in which the display unit is installed and operational must be dust-
free. The room must comply with a dust class of 8 or better according to
ISO14644-1. If the room in which the display unit is installed does not comply
with the dust class stated above, please contact Barco to discuss possibilities to
protect the display unit against dust.
