Barco Njord, User Manual

Page: 45 / 72

45 R5913592 / Njord
The OSD interface uses buttons to display the main menu. Each main menu contains submenus.
The OSD can be disabled by pressing the OSD on/off button.
Image 5 – 2 Example of the home menu
The projector software platform uses access levels what each user can do. A standard user has access to the
standard projector functionality. A certified service technician has also access to the advanced settings menu.
This menu is password protected. This password can only be obtained by following the service partner
training.
5.2 Navigation
Navigation via the RCU or local keypad
Navigating the OSD can be done using the remote control or the local keypad.
1 4
4
2 3
3 2 1
Image 5 – 3
To start up the menu structure, press MENU (1).
Use the arrow keys ( Menu Navigation buttons) to navigate to the desired menu item (2). The background
color changes to light blue.
Press the Menu Selection button (center key of the arrow keys), also called OK button, to activate that item
and to jump one level deeper (3).
Use the numeral keys to enter values, or use the arrow keys to move the bar scale up or down.
Press the Back button to go up one level (4).
GUI – Introduction