![background image](http://html1.mh-extra.com/html/barco/njord/njord_user-manual_4189179039.webp)
39
R5913592 /
Njord
LED
Color status
Description
GREEN
Projector is on
LIGHT (Illumination LED)
Off
Light source is off
RED
No light source detected
ORANGE
Light source is on in ECO mode
GREEN
Light source is on in normal mode
GREEN-ORANGE
Light source is on in CLO mode
ERR (error LED)
Off
No error
RED toggles on/off
Error
ORANGE toggles on/off
Warning
IR
RED
IR signal received
GREEN
IR signal acknowledged
4.6 Pulse Quad Combo input Mk II
Overview Quad Combo Input Mk II
SEL
SEL
SEL
SEL
SEL
SEL
SEL
SDI IN
SDI IN/OUT
SEL
SYNC
SYNC
A
B
C
D
SYNC
SYNC
SYNC
SYNC
DP
HDBT 2
SYNC
HDMI
HDBT 1
SYNC
3G/12G
3G
3G
3G
1
2
3
4
5
6
7
8
Image 4
–
6
1
Quad SDI channel A: 3G/12G input
2
Quad SDI channel B: 3G input
3
Quad SDI channel C: 3G SDI input + 3G/12G output
4
Quad SDI channel D: 3G SDI input / output
5
DisplayPort Input
6
HDMI input
7
HDBaseT input 1
8
HDBaseT input 2
Functionality of the Quad Combo input Mk II
The Quad Combo Input Mk II support 12G input and throughput on the SDI connectors.
Compared with the Mk I the Mk II includes the following:
•
SDI input A
supports
12G
input signals.
•
SDI input C
functions as a
loop-through output
for any signal placed on
input A
.
•
SDI input D
functions as a
loop-through output
for any signal placed on
input B
.
•
HDBaseT input 1
supports
network connectivity
.
CAUTION:
Ethernet should only be connected to either the 10/100 base-T port (on the
communication panel) or the HDBaseT input (on the Quad Combo Input Mk II). Using both at the
same time will lead to undefined behavior.
SDI input & output
–
How does it work?
When connecting an SDI source to the projector and the signal is HD or 3G, you can choose any of the four
input connectors.
When connecting multiple projectors with the same signal, you can connect the signal as follows:
•
Connect the source signal to Input A or B of the first projector.
•
If the source signal is connected to
input A
, connect
input/output C
to the Input of the following projector.
•
If the source signal is connected to
input B
, connect
input/output D
to the Input of the following projector.
•
Continue in the same fashion until all projectors are connected.
When connecting a 12G SDI source to the projector, you can only connect that source to input A.
Summary of Contents for Njord
