Barco Njord, User Manual

Page: 21 / 72

21 R5913592 / Njord
Image 2 – 8
The background image of the startup screen and info screens can be changed with Projector
Toolset with an installed NJORD plug-in.
2.3 Start image projection
Connect the source
1. Connect the source cable with the appropriate input port on the Input & Communication module.
Tip: See chapter “ Input & Communication ” , page 33, for more info about supported input
formats.
Image 2 – 9 Example of connecting an HDMI source.
2. Check if the SYNC LED lit up ORANGE (reference 1). This indicates that the sync is detected on the input
signal.
1
Image 2 – 10
Select the source
1. Press the Input button (reference I ) on the remote control or local keypad.
Getting Started