Barco Njord, Installation Manual

Page: 163 / 232

163 R5913593 /01 Njord
12.5 GSM configuration
Only possible when a GSM module with SIM card is installed in the projector.
What can be done ?
To configure the projector software with the installed SIM card, a correct PIN code (4digits) must be entered.
As the PIN code cannot be checked with the one on the SIM card, ensure to enter the correct PIN
code.
When your SIM card is blocked, you have to remove the SIM card from the GSM module and to
insert the SIM card in a mobile phone so that you can enter the PUK code to unblock the SIM card.
How to activate
1. In the main menu, select Settings → Communication → GSM .
Image 12 – 13 Communication menu, GSM
The GSM pin code input menu is displayed. If a pin code has already been entered, it will not be
necessary to enter the pin code again. If all you see is an entry field, continue with next step.
2. Enter the 4 digits of the pin code and select APPLY and confirm with OK .
Image 12 – 14 Example of the GSM menu once the pin code has been applied
GUI – System Settings