Barco MXRT-1450, User Manual, Page: 34 / 53

5. Driver and software features
Image 5-14
Supported display controllers
When driven by an MXRT-x400 or later display controller, SoftGlow can be con fi gurated on MDMC-12133
displays.
5.12.2 Operation
Using SoftGlow
The Uniti lights will be set to the SoftGlow settings when the user has logged on to the Barco display
system.
5.12.3 Con fi guration
Con fi guring SoftGlow
Task Light and Wall Light : Use these sliders to set the brightness of the lights. Click and enter 0 to shut
the light off.
5.13 SpotView
5.13.1 Description
Overview
The SpotView feature allows focused observation during readings by dimming images outside a region of
interest and optionally enhancing the contrast in the region of interest.
The SpotView Mag feature offers 2x zoom within the SpotView region of interest. SpotView Invert inverts
the pixels in the region of interest. SpotView Align creates a bar-shaped region of interest. SpotView Align
has two modes of operation, a straight bar, or a V-shaped bar.
Image 5-15
Supported displays and display controllers
When driven by an MXRT-x500 or later display controller, SpotView can be enabled on selected Barco
Coronis, Nio, and Mammography displays, including MDCC-6430, MDCC-6330, MDCC-4330, MDCC-
4230, MDCG-5221, MDCG-3221, MDNC-6121, MDNC-3421, MDNC-3321, MDNC-2221, MDNG-5221,
MDMG-5121, MDMG-5221, MDMC-12133.
5.13.2 Operation
Using SpotView
SpotView highlights a region of interest. The region of interest is selected by the use of the Barco Touch-
pad or by the mouse and a hotkey (default: Shift+X ). To control SpotView with the touchpad,
32 K5905271 DISPLAY CONTROLLER 27/02/2017