Barco MXRT-1450, User Manual, Page: 31 / 53

5. Driver and software features
5.8.3 Con fi guration
Con fi guring Reading Environment for Diagnostic Displays
• Use the settings QAWeb already has: When selected, reading environment settings for diagnostic
displays are disabled in the Barco System Settings Control Panel.
• Suggest the following settings to QAWeb: When selected, the reading environments are modi fi -
able.
• White point chromaticity: This selects between clearbase, bluebase, and native white points.
• Ambient light condition: This selects the expected ambient light condition based on reading room
class.
• SteadyColor calibration: This selects the color calibration model of the SteadyColor display.
• Luminance of white: This slider sets the calibration luminance of the display.
Con fi guring Reading Environment for Non-Diagnostic Displays
• Select the displays: All supported non-diagnostic displays are listed in the con fi guration section.
Click on the checkbox to enable the feature on that display.
• Display luminance: This slider bar sets the luminance reduction for the selected displays.
5.9 Screen Capture
5.9.1 Description
Overview
The Screen Capture feature captures the desktop into an image, including the Intuitive Work fl ow features,
such as SpotView .
Image 5-10
Supported display controllers
This feature is supported by MXRT-x400 and above display controllers.
5.9.2 Operation
Using Screen Capture
The screen capture is triggered through a hotkey. The user can choose to capture the image of the display
with the cursor to the clipboard. The user can also choose to capture an image of each display to a
fi le in
either PNG or PPM format.
K5905271 DISPLAY CONTROLLER 27/02/2017 29