Barco MUIP-2112, User Manual

Page: 30 / 36

K5902132 (451920612534) /03 MUIP-2112 30
Barco software products are the property of Barco. They are distributed under copyright by Barco NV or Barco
Inc., for use only under the specific terms of a software license agreement between Barco NV or Barco Inc.
and the licensee. No other use, duplication, or disclosure of a Barco software product, in any form, is
authorized.
The specifications of Barco products are subject to change without notice.
Trademarks
All trademarks and registered trademarks are property of their respective owners.
Copyright notice
This document is copyrighted. All rights are reserved. Neither this document, nor any part of it, may be
reproduced or copied in any form or by any means - graphical, electronic, or mechanical including
photocopying, taping or information storage and retrieval systems - without written permission of Barco.
© 2020 Barco NV all rights reserved.
4.8 Technical specifications
Overview
Description Configuration for MUIP-2112 W00
Processor (SoC) Intel ® Celeron® N2930, Quad Core @1.83GHz, 2MB Cache.
BIOS INSYDE
Operating System Microsoft Windows 7 Embedded / Windows 10 ioT
Networking Built-in Gigabit Ethernet LAN interfaces (2 ports)
Memory 4 GB Dual-Channel DDR3L 1333MHz RAM (onboard)
Local Storage 32 GB SATA onboard SSD
LCD Panel Characteristics 12.5 ” TFT LCD 1920 x 1080 pixels resolution.
Audio System Audio Interface with Mic. Input and Line Output stereo jacks
USB 1 x USB 2.0 type A port and 1 x USB 3.0 type A port under the rear cable
cover
Buttons and Controls Power button on bottom-right side, reset pin-hole under connector cover
Input device Touchscreen multi-touch (PCAP technology)
Output mini DP++ interface for connection to external monitor
Power source input 12 – 24 VDC (2.4 – 1.2 A)
Internal battery 2270 mAh / 7.2 Vdc (not removable) avoids UI crash in case of mains
power drop
Protection against electrical
shocks Class II
Power supply external AC-DC power supply
Operating temperature (for
safety) 10 °C to 35 °C for units provided with battery pack
Operating temperature (for
performance) 10 °C to 35 °C
Operating humidity 20% to 80% for performance / 10% to 90% for safety (non-condensing)
Important information