background image

www.barcodefense.com

MRFD family

A full range of

Modular Rugged Flat Displays

Technical specifications 

K5906063 rev.00.01 0706

Technical specifications are subject to change without prior notice

Front bonding

Barco has developed unique bonding
capabilities to protect the LCD against
extreme environmental conditions
(temperature, shock, vibration,
humidity, EMI,...) and to significantly
improve optical performance and 
protection against condensation. 

Automatic Phase
Adjust (APA)

The APA function automatically locks
the LCD sampling clock to the 
(drifting) graphics generator pixel 
frequency, thus avoiding image 
artifacts like pixel noise. Drift can be
caused by temperature changes, 
electromagnetic interference and
other environmental factors.

LCD Flicker Compensation (patented)

When updating images with high contrast and high density (such as sonar or
dense tactical data) the LCD’s brightness varies with the rate of updating. This
luminance variation, referred to as ‘LCD Flicker’, can cause serious eye-fatigue and
affect the interpretation of the displayed data. Barco has integrated a unique set
of algorithms that reside in the hardware interface of the display (between the
graphics generator and the LCD). This feature compensates for LCD Flicker, without
affecting the displayed data, over all operating parameters.

Extended dimming

range

For many products, Barco uses 
in-house manufactured circuitry to
provide advanced dimming solutions.
This provides the advantages of a
darker background resulting in higher
contrast for lower ambient light 
conditions and/or high-bright 
solutions for higher ambient light 
conditions.

VIBRATION

operating

SHOCK

operating
optional

TEMPERATURE operating

non-operating

COLD START-UP

HUMIDITY

operating

EMI/EMC

FCC

EN

MIL-STD

ALTITUDE

operating
non-operating

CRASH SAFETY

non-operating

RAPID DECOMPRESSION  

DRIP PROOF

operating

FUNGUS

SALT FOG

SAND DUST

SAFETY

MIL-STD-167-1 Type I, MIL-E-5400T: 2g

30g - 12.5msec half sine

60g - Z axis/40g - X,Y axis 

MIL-S-901D (for specific configurations)

-25°C - 55°C

-40°C - 70°C

(MIL-STD-810E)

Start-up @ -25°C

3min. usable picture

20 min. full spec

(MIL-STD-810E)

max. 95% @ 40°C non-condensing

(MIL-STD-810E)

Emission: FCC-A

Emission: EN 55022 Limit A

Immunity: EN 61000-4-x

MIL-STD-461E: aircraft-air force

MIL-STD-461E: Ground-Army

up to 25,000ft
up to 40,000ft

(MIL-STD-810E)

n/a

n/a

At unit level: +/- 45° in all directions

(MIL-STD-810E)

Fungus inert materials are selected

(MIL-STD-810E)

Complies at unit level

(MIL-STD-810D)

Complies at unit level

(MIL-STD-810D)

IEC 60950

MIL-STD-167-1 Type I, MIL-E-5400T: 5g

30g - 12.5msec half sine

n/a

-25°C - 55°C

-40°C - 70°C

(MIL-STD-810E)

Start-up @ -25°C

3min. usable picture

20 min. full spec

(MIL-STD-810E)

max. 95% @ 40°C non-condensing

(MIL-STD-810E)

Emission: FCC-A

Emission: EN 55022 Limit A

Immunity: EN 61000-4-x

MIL-STD-461E: aircraft-air force

MIL-STD-461E: Ground-Army

up to 35,000ft
up to 40,000ft

(MIL-STD-810E)

Crash safety test 40g - 9msec

Operating from 5,000ft (843mbar) 

to 35,000ft (238mbar) @ 1 inch Hg/sec

At unit level: +/- 45° in all directions

(MIL-STD-810E)

Fungus inert materials are selected

(MIL-STD-810E)

Complies at unit level

(MIL-STD-810D)

Complies at unit level

(MIL-STD-810D)

IEC 60950

MRFD        

MRFD A

Technologically advanced solutions

AR coating

Protective glass

EMI shield

LCD

NVIS filter (if required)

Coating filters

Diffuser

Backlight system

With APA

Without APA

© Bob Houlihan, U.S. Army

6

  

Si

g

ma

ma

In search of continuous improvement 

Barco

Pres. Kennedypark 35 - B-8500 Kortrijk, Belgium

Phone: +32 56 233 412 - Fax: +32 56 233 462

E-mail: [email protected] 

Barco Federal Systems Corporation

3059 Premiere Parkway, Suite 100 

Duluth, Georgia, 30097-4905, USA

Phone: +1 678 475 8000 - Fax: +1 678 475 8100

Email: [email protected]

BarcoView-TEXEN

7 Rue Roger Camboulives - BP 1226 - F-31037 Toulouse, France

Phone: +33 5 34 63 71 74 - Fax: +33 5 34 63 70 20

Highly efficient
Power Supply Board

Barco’s proprietary Power Supply
Boards are designed for maximum 
efficiency. The board’s low-heat
design provides optimum operator 
convenience.

Summary of Contents for MRFD-243 A







Reviews: