manualshive.com logo in svg

Barco MGP D5, Installation & User Manual

Share
Download
Barco MGP D5 Installation & User Manual Download Page 18

Quick installation overview

MGP D5 Dicom Theater Lite

19

Quick installation overview

MGP D5 Dicom Theater installation overview

To install the MGP D5 Dicom Theater system completely, you 
have to follow these steps:

1. Install the BarcoMed display controller(s) in the PC. For more 

information, please refer to the section about the “Display 
controller installation”.

2. Install and connect the medical grade projector(s) and 

display(s). For more information, please refer to the MGP D5 
User Guide and the display User Manual.

3. Install the BarcoMed driver software. For more information, 

please refer to the section about the “BarcoMed software 
driver installation”.

4. Install the MediCal Pro and TheaterWatch software. For more 

information, please refer to the sections about MediCal Pro 
and TheaterWatch.

5. Start and use MediCal Pro and TheaterWatch. For more 

information, please refer to the sections about MediCal Pro 
and TheaterWatch.

Installation examples

This chapter illustrates the most common set-ups supported by 
MGP D5 Dicom Theater.

Summary of Contents for MGP D5





















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands