12. Troubleshooting
1.
Check the USB connection between LEX unit and MCU
-
Plug and reconnect the USB connector of the LEX unit from/to the MCU
-
On the Auto Alignment Head, do a power cycle
2.
Try to
fi
nd out if the USB port on the MCU is failing
-
Plug in the USB connector of the LEX unit into another USB port on the MCU
-
On the Auto Alignment Head, do a power cycle
3.
Check the RJ45 connections of the SFTP Cat5e cable
-
Unplug and reconnect both RJ45 connectors of the SFTP Cat.5e cable between the Auto Alignment Head and the LEX unit
12.3 Camera
Camera settings
To guarantee proper working, the camera settings should never be changed! The default settings of the various selection switches
are listed below:
•
Power switch:
ON
•
Rotary dial:
M
•
Focus selection switch on the camera lens:
MF
Image 12-2
Camera settings
No image from the camera
No
Live view from current selected camera
is visible on the
Position page
of the XDS RACU user interface
Possible cause
Action
Lens cap on the Camera lens
Remove the lens cap
Auto Alignment Head not powered
See concerning topic above
Camera not well connected
Plug in the USB cable on the Camera. See image 12-3 below.
Camera switched off
Switch the main switch to ON
Rotary dial of the Camera in wrong position
Set the rotary dial of the Camera to “M”
108
R59770509 MES ACURAS HEAD - AUTO ALIGNMENT HEAD 24/11/2010
Summary of Contents for MES ACURAS HEAD
