Barco MES ACURAS HEAD User And Installation Manual Download Page 11

Page: 11 / 131

1. About

1. ABOUT

For the latest updates of this manual, browse to

www.barco.com

(public) or

https://my.barco.com

(secured)

or Intranet (Barco employees only).

1.1

Name

The MES ACURAS HEAD will mainly be referred to as

Auto Alignment Head

in this manual.

1.2

About this manual

This manual is part of the documentation set describing the XDS RACU Auto Alignment.

Partnumber

Description

Level

R59770509

User and installation guide

Installer and user

Table 1-1
Documentation.

1.3

Related products

Software related products

The main tools are the following:

Description

installed where...

XDS RACU server software

MCU

XDS RACU client software

eRACU hand held unit

Hardware related product

Description

used for...

MCU

server

eRACU hand held unit

remote control-touch screen panel

Auto Alignment Head

Automatic measurements and alignments

1.4

Symbols and fonts

Symbol overview

The following icons are used in the manual :

Caution

Warning

R59770509 MES ACURAS HEAD - AUTO ALIGNMENT HEAD 24/11/2010

Summary of Contents for MES ACURAS HEAD




































































































































Search results

Summary of Contents for MES ACURAS HEAD

Reviews:

Brands by name

Popular brands

Barco MES ACURAS HEAD, User And Installation Manual

Search results

Summary of Contents for MES ACURAS HEAD

Reviews:

Brands by name

Popular brands